Cancel Objects during print

[elfl0rd]

Hi everyone, please tell me how does this function work and which of the H32 builds (if any) supports it? I have the impression that it is disabled everywhere, not only on EX-UI.

[classicrocker883]

M486 gcode. I haven't tried using it myself, maybe someone else has.

but you need to install the plugin for Cura, or for PrusaSlicer

I'm not sure how it exactly works. but the only H32 firmware with this enabled is -MM (Manual Mesh) and -Default. it may be possible to have it enabled for -UBL or -BLT, but other options would need to be disabled for it to fit.

[classicrocker883]

I made a new release HC32 for April Rev.1 and enabled CANCEL_OBJECTS for -UBL and -BLT if you'd like to use this.

let me know how this works if you get it to work

[elfl0rd]

О! Thanks, I'll try it now! Did you turn it on for all -UBL variants, or is it off for -EX-UI for example? I want to try it now, maybe I'm wrong but I started with -UBL-EX-UI :)

[elfl0rd]

Hmm, the UBL-EX-UI shows the messages "printing object 0\1\2\etc..." but I don't see any option to manually disable the printing of any of them.

[classicrocker883]

it's enabled for all, so you use the Gcode M486, you'll need to connect a terminal like octoprint or something like Pronterface through a PC via USB. Cura is able to do this in the Monitor tab.

I'm not sure if I can make it able to work through the lcd UI, but that I can look into

[elfl0rd]

Just in case, I wrote this in the root firmware for the ender mriscoc#1444
Without an interface it really makes little sense if you use a printer with a cable, support for canceling items in the printer firmware is useless because it's easier to print directly from the host.

But if you take a look (maybe it's simple? I don't know, I'm not a coder :)) it would be great.

[classicrocker883]

ill put in a feature request for Marlin, this might take a few heads to figure out