Recognize changes in resolution and adapt accordingly #140
Description
Dell Inspiron 3521 helloSystem 0.8.0 (Build 0H284)
I have a script in autostart that runs xrandr to connect to an external monitor:
#!/bin/sh
xrandr --output LVDS-1 --off --output VGA-1 --off --output HDMI-1 --primary --mode 1920x1080 --pos 1920x0 --rotate normal --output DP-1 --off
The problem is that the top menu bar retains the original width from my laptop 1366 rather than display at the width of 1920. Everything else seems aware of the change. It seems like the menu is not picking up the events from xrandr?
I see issue#36, you state “Actually this is the correct behavior - Menu should be displayed on the main screen”, but I’ve disabled the laptop screen:
gathol% xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
LVDS-1 connected (normal left inverted right x axis y axis)
1366x768 60.04 + 40.02
1280x720 60.00 59.99 59.86 59.74
1024x768 60.04 60.00
960x720 60.00
928x696 60.05
896x672 60.01
1024x576 59.95 59.96 59.90 59.82
960x600 59.93 60.00
960x540 59.96 59.99 59.63 59.82
800x600 60.00 60.32 56.25
840x525 60.01 59.88
864x486 59.92 59.57
700x525 59.98
800x450 59.95 59.82
640x512 60.02
700x450 59.96 59.88
640x480 60.00 59.94
720x405 59.51 58.99
684x384 59.88 59.85
640x400 59.88 59.98
640x360 59.86 59.83 59.84 59.32
512x384 60.00
512x288 60.00 59.92
480x270 59.63 59.82
400x300 60.32 56.34
432x243 59.92 59.57
320x240 60.05
360x202 59.51 59.13
320x180 59.84 59.32
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 476mm x 268mm
1920x1080 60.00*+ 50.00 59.94
1920x1080i 60.00 50.00 59.94
1680x1050 59.88
1600x900 60.00
1280x1024 75.02 60.02
1280x800 59.91
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.03 60.00
832x624 74.55
800x600 75.00 60.32
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
DP-1 disconnected (normal left inverted right x axis y axis)
gathol%
