diff --git a/boards/heltec_vision_master_t190.json b/boards/heltec_vision_master_t190.json new file mode 100644 index 00000000..6aa674fc --- /dev/null +++ b/boards/heltec_vision_master_t190.json @@ -0,0 +1,44 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32s3_out.ld", + "partitions": "default_16MB.csv", + "memory_type": "qio_opi" + }, + "core": "esp32", + "extra_flags": [ + "-DBOARD_HAS_PSRAM", + "-DARDUINO_USB_MODE=0", + "-DARDUINO_USB_CDC_ON_BOOT=1", + "-DARDUINO_RUNNING_CORE=1", + "-DARDUINO_EVENT_RUNNING_CORE=1" + ], + "f_cpu": "240000000L", + "f_flash": "80000000L", + "flash_mode": "qio", + "psram_type": "opi", + "hwids": [ + ["0x303A", "0x1001"], + ["0x303A", "0x0002"] + ], + "mcu": "esp32s3", + "variant": "heltec_vision_master_t190" + }, + "connectivity": ["wifi", "bluetooth", "lora"], + "debug": { + "openocd_target": "esp32s3.cfg" + }, + "frameworks": ["arduino", "espidf"], + "name": "Heltec Vision Master T190", + "upload": { + "flash_size": "16MB", + "maximum_ram_size": 8388608, + "maximum_size": 16777216, + "use_1200bps_touch": true, + "wait_for_upload_port": true, + "require_upload_port": true, + "speed": 921600 + }, + "url": "https://heltec.org/project/vision-master-t190/", + "vendor": "Heltec" +} diff --git a/src/helpers/ui/ST7789Display.cpp b/src/helpers/ui/ST7789Display.cpp index 9e71e6bd..6a91457a 100644 --- a/src/helpers/ui/ST7789Display.cpp +++ b/src/helpers/ui/ST7789Display.cpp @@ -18,7 +18,11 @@ bool ST7789Display::begin() { pinMode(PIN_TFT_VDD_CTL, OUTPUT); pinMode(PIN_TFT_LEDA_CTL, OUTPUT); digitalWrite(PIN_TFT_VDD_CTL, LOW); + #ifdef PIN_TFT_LEDA_CTL_ACTIVE + digitalWrite(PIN_TFT_LEDA_CTL, PIN_TFT_LEDA_CTL_ACTIVE); + #else digitalWrite(PIN_TFT_LEDA_CTL, LOW); + #endif digitalWrite(PIN_TFT_RST, HIGH); display.init(); @@ -43,15 +47,22 @@ void ST7789Display::turnOn() { delay(20); // Now turn on the backlight + #ifdef PIN_TFT_LEDA_CTL_ACTIVE + digitalWrite(PIN_TFT_LEDA_CTL, PIN_TFT_LEDA_CTL_ACTIVE); + #else digitalWrite(PIN_TFT_LEDA_CTL, LOW); - + #endif _isOn = true; } } void ST7789Display::turnOff() { digitalWrite(PIN_TFT_VDD_CTL, HIGH); +#ifdef PIN_TFT_LEDA_CTL_ACTIVE + digitalWrite(PIN_TFT_LEDA_CTL, !PIN_TFT_LEDA_CTL_ACTIVE); +#else digitalWrite(PIN_TFT_LEDA_CTL, HIGH); +#endif digitalWrite(PIN_TFT_RST, LOW); _isOn = false; } diff --git a/src/helpers/ui/ST7789Display.h b/src/helpers/ui/ST7789Display.h index b267a2cb..0f7ff71b 100644 --- a/src/helpers/ui/ST7789Display.h +++ b/src/helpers/ui/ST7789Display.h @@ -14,8 +14,11 @@ class ST7789Display : public DisplayDriver { bool i2c_probe(TwoWire& wire, uint8_t addr); public: +#ifdef HELTEC_VISION_MASTER_T190 + ST7789Display() : DisplayDriver(128, 64), display(&SPI, PIN_TFT_RST, PIN_TFT_DC, PIN_TFT_CS, GEOMETRY_RAWMODE, 320, 170,PIN_TFT_SDA,-1,PIN_TFT_SCL) {_isOn = false;} +#else ST7789Display() : DisplayDriver(128, 64), display(&SPI1, PIN_TFT_RST, PIN_TFT_DC, PIN_TFT_CS, GEOMETRY_RAWMODE, 240, 135) {_isOn = false;} - +#endif bool begin(); bool isOn() override { return _isOn; } diff --git a/variants/heltec_vision_master_t190/HeltecT190Board.cpp b/variants/heltec_vision_master_t190/HeltecT190Board.cpp new file mode 100644 index 00000000..c5b03bc8 --- /dev/null +++ b/variants/heltec_vision_master_t190/HeltecT190Board.cpp @@ -0,0 +1,69 @@ +#include "HeltecT190Board.h" + +void HeltecT190Board::begin() { + ESP32Board::begin(); + + pinMode(PIN_ADC_CTRL, OUTPUT); + digitalWrite(PIN_ADC_CTRL, LOW); // Initially inactive + + periph_power.begin(); + + esp_reset_reason_t reason = esp_reset_reason(); + if (reason == ESP_RST_DEEPSLEEP) { + long wakeup_source = esp_sleep_get_ext1_wakeup_status(); + if (wakeup_source & (1 << P_LORA_DIO_1)) { // received a LoRa packet (while in deep sleep) + startup_reason = BD_STARTUP_RX_PACKET; + } + + rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS); + rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1); + } + } + + void HeltecT190Board::enterDeepSleep(uint32_t secs, int pin_wake_btn) { + esp_sleep_pd_config(ESP_PD_DOMAIN_RTC_PERIPH, ESP_PD_OPTION_ON); + + // Make sure the DIO1 and NSS GPIOs are hold on required levels during deep sleep + rtc_gpio_set_direction((gpio_num_t)P_LORA_DIO_1, RTC_GPIO_MODE_INPUT_ONLY); + rtc_gpio_pulldown_en((gpio_num_t)P_LORA_DIO_1); + + rtc_gpio_hold_en((gpio_num_t)P_LORA_NSS); + + if (pin_wake_btn < 0) { + esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet + } else { + esp_sleep_enable_ext1_wakeup( (1L << P_LORA_DIO_1) | (1L << pin_wake_btn), ESP_EXT1_WAKEUP_ANY_HIGH); // wake up on: recv LoRa packet OR wake btn + } + + if (secs > 0) { + esp_sleep_enable_timer_wakeup(secs * 1000000); + } + + // Finally set ESP32 into sleep + esp_deep_sleep_start(); // CPU halts here and never returns! + } + + void HeltecT190Board::powerOff() { + // TODO: re-enable this when there is a definite wake-up source pin: + // enterDeepSleep(0); + } + + uint16_t HeltecT190Board::getBattMilliVolts() { + analogReadResolution(10); + digitalWrite(PIN_ADC_CTRL, HIGH); + delay(10); + uint32_t raw = 0; + for (int i = 0; i < 8; i++) { + raw += analogRead(PIN_VBAT_READ); + } + raw = raw / 8; + + digitalWrite(PIN_ADC_CTRL, LOW); + + return (5.42 * (3.3 / 1024.0) * raw) * 1000; + } + + const char* HeltecT190Board::getManufacturerName() const { + return "Heltec T190"; + } + diff --git a/variants/heltec_vision_master_t190/HeltecT190Board.h b/variants/heltec_vision_master_t190/HeltecT190Board.h new file mode 100644 index 00000000..96c09c1c --- /dev/null +++ b/variants/heltec_vision_master_t190/HeltecT190Board.h @@ -0,0 +1,30 @@ +#pragma once + +#include +#include +#include +#include + +// LoRa radio module pins for heltec_vision_master_e290 +#define P_LORA_DIO_1 14 +#define P_LORA_NSS 8 +#define P_LORA_RESET 12 +#define P_LORA_BUSY 13 +#define P_LORA_SCLK 9 +#define P_LORA_MISO 11 +#define P_LORA_MOSI 10 + +class HeltecT190Board : public ESP32Board { + +public: + RefCountedDigitalPin periph_power; + + HeltecT190Board() : periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE) { } + + void begin(); + void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1); + void powerOff() override; + uint16_t getBattMilliVolts() override; + const char* getManufacturerName() const override ; + +}; diff --git a/variants/heltec_vision_master_t190/pins_arduino.h b/variants/heltec_vision_master_t190/pins_arduino.h new file mode 100644 index 00000000..56856106 --- /dev/null +++ b/variants/heltec_vision_master_t190/pins_arduino.h @@ -0,0 +1,61 @@ +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +static const uint8_t LED_BUILTIN = 45; // LED is not populated on earliest board variant +#define BUILTIN_LED LED_BUILTIN // Backward compatibility +#define LED_BUILTIN LED_BUILTIN + +static const uint8_t TX = 43; +static const uint8_t RX = 44; + +static const uint8_t SDA = 2; +static const uint8_t SCL = 1; + +static const uint8_t SS = 8; +static const uint8_t MOSI = 10; +static const uint8_t MISO = 11; +static const uint8_t SCK = 9; + +static const uint8_t A0 = 1; +static const uint8_t A1 = 2; +static const uint8_t A2 = 3; +static const uint8_t A3 = 4; +static const uint8_t A4 = 5; +static const uint8_t A5 = 6; +static const uint8_t A6 = 7; +static const uint8_t A7 = 8; +static const uint8_t A8 = 9; +static const uint8_t A9 = 10; +static const uint8_t A10 = 11; +static const uint8_t A11 = 12; +static const uint8_t A12 = 13; +static const uint8_t A13 = 14; +static const uint8_t A14 = 15; +static const uint8_t A15 = 16; +static const uint8_t A16 = 17; +static const uint8_t A17 = 18; +static const uint8_t A18 = 19; +static const uint8_t A19 = 20; + +static const uint8_t T1 = 1; +static const uint8_t T2 = 2; +static const uint8_t T3 = 3; +static const uint8_t T4 = 4; +static const uint8_t T5 = 5; +static const uint8_t T6 = 6; +static const uint8_t T7 = 7; +static const uint8_t T8 = 8; +static const uint8_t T9 = 9; +static const uint8_t T10 = 10; +static const uint8_t T11 = 11; +static const uint8_t T12 = 12; +static const uint8_t T13 = 13; +static const uint8_t T14 = 14; + +static const uint8_t RST_LoRa = 12; +static const uint8_t BUSY_LoRa = 13; +static const uint8_t DIO1 = 14; + +#endif /* Pins_Arduino_h */ diff --git a/variants/heltec_vision_master_t190/platformio.ini b/variants/heltec_vision_master_t190/platformio.ini new file mode 100644 index 00000000..026e1e18 --- /dev/null +++ b/variants/heltec_vision_master_t190/platformio.ini @@ -0,0 +1,85 @@ +[Heltec_Vision_Master_T190_base] +extends = esp32_base +board = heltec_vision_master_t190 +build_flags = + ${esp32_base.build_flags} + -I variants/heltec_vision_master_t190 + -I src/helpers/ui + -D HELTEC_VISION_MASTER_T190 + -D RADIO_CLASS=CustomSX1262 + -D WRAPPER_CLASS=CustomSX1262Wrapper + -D LORA_TX_POWER=22 + -D PIN_USER_BTN=0 + -D PIN_VEXT_EN=5 + -D PIN_VEXT_EN_ACTIVE=HIGH + -D PIN_VBAT_READ=6 + -D PIN_ADC_CTRL=46 + -D SX126X_DIO2_AS_RF_SWITCH=true + -D SX126X_DIO3_TCXO_VOLTAGE=1.8 + -D SX126X_CURRENT_LIMIT=140 + -D SX126X_RX_BOOSTED_GAIN=1 + -D PIN_BOARD_SDA=2 + -D PIN_BOARD_SCL=1 + -D PIN_TFT_SCL=38 + -D PIN_TFT_SDA=48 + -D PIN_TFT_RST=40 + -D PIN_TFT_VDD_CTL=7 + -D PIN_TFT_LEDA_CTL=17 + -D PIN_TFT_LEDA_CTL_ACTIVE=HIGH + -D PIN_TFT_CS=39 + -D PIN_TFT_DC=47 + -D ST7789 + -D DISPLAY_CLASS=ST7789Display +build_src_filter = ${esp32_base.build_src_filter} + +<../variants/heltec_vision_master_t190> + + + + + + + + +lib_deps = + ${esp32_base.lib_deps} + adafruit/Adafruit GFX Library @ ^1.12.1 + +[env:Heltec_Vision_Master_T190_radio_ble] +extends = Heltec_Vision_Master_T190_base +build_flags = + ${Heltec_Vision_Master_T190_base.build_flags} + -D MAX_CONTACTS=100 + -D MAX_GROUP_CHANNELS=8 + -D BLE_PIN_CODE=123456 ; dynamic, random PIN + -D BLE_DEBUG_LOGGING=1 + -D OFFLINE_QUEUE_SIZE=256 +build_src_filter = ${Heltec_Vision_Master_T190_base.build_src_filter} + + + +<../examples/companion_radio> +lib_deps = + ${Heltec_Vision_Master_T190_base.lib_deps} + densaugeo/base64 @ ~1.4.0 + +[env:Heltec_Vision_Master_T190_repeater] +extends = Heltec_Vision_Master_T190_base +build_flags = + ${Heltec_Vision_Master_T190_base.build_flags} + -D ADVERT_NAME='"Heltec T190 Repeater"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 +build_src_filter = ${Heltec_Vision_Master_T190_base.build_src_filter} + +<../examples/simple_repeater> +lib_deps = + ${Heltec_Vision_Master_T190_base.lib_deps} + ${esp32_ota.lib_deps} + +[env:Heltec_Vision_Master_T190_room_server] +extends = Heltec_Vision_Master_T190_base +build_flags = + ${Heltec_Vision_Master_T190_base.build_flags} + -D ADVERT_NAME='"Heltec T190 Room"' + -D ADVERT_LAT=0.0 + -D ADVERT_LON=0.0 + -D ADMIN_PASSWORD='"password"' + -D ROOM_PASSWORD='"hello"' +build_src_filter = ${Heltec_Vision_Master_T190_base.build_src_filter} + +<../examples/simple_room_server> +lib_deps = + ${Heltec_Vision_Master_T190_base.lib_deps} + ${esp32_ota.lib_deps} diff --git a/variants/heltec_vision_master_t190/target.cpp b/variants/heltec_vision_master_t190/target.cpp new file mode 100644 index 00000000..9e13d36b --- /dev/null +++ b/variants/heltec_vision_master_t190/target.cpp @@ -0,0 +1,53 @@ +#include "target.h" +#include + +HeltecT190Board board; + +#if defined(P_LORA_SCLK) + static SPIClass spi(FSPI); + RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi); +#else + RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY); +#endif + +WRAPPER_CLASS radio_driver(radio, board); + +ESP32RTCClock fallback_clock; +AutoDiscoverRTCClock rtc_clock(fallback_clock); + +SensorManager sensors; + +#ifdef DISPLAY_CLASS +DISPLAY_CLASS display; +#endif + +bool radio_init() { + fallback_clock.begin(); + rtc_clock.begin(Wire); + +#if defined(P_LORA_SCLK) + return radio.std_init(&spi); +#else + return radio.std_init(); +#endif +} + +uint32_t radio_get_rng_seed() { + return radio.random(0x7FFFFFFF); +} + +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) { + radio.setFrequency(freq); + radio.setSpreadingFactor(sf); + radio.setBandwidth(bw); + radio.setCodingRate(cr); +} + +void radio_set_tx_power(uint8_t dbm) { + radio.setOutputPower(dbm); +} + +mesh::LocalIdentity radio_new_identity() { + RadioNoiseListener rng(radio); + return mesh::LocalIdentity(&rng); // create new random identity +} diff --git a/variants/heltec_vision_master_t190/target.h b/variants/heltec_vision_master_t190/target.h new file mode 100644 index 00000000..9dfab3d8 --- /dev/null +++ b/variants/heltec_vision_master_t190/target.h @@ -0,0 +1,27 @@ +#pragma once + +#define RADIOLIB_STATIC_ONLY 1 +#include +#include +#include +#include +#include +#include +#ifdef DISPLAY_CLASS +#include +#endif + +extern HeltecT190Board board; +extern WRAPPER_CLASS radio_driver; +extern AutoDiscoverRTCClock rtc_clock; +extern SensorManager sensors; + +#ifdef DISPLAY_CLASS +extern DISPLAY_CLASS display; +#endif + +bool radio_init(); +uint32_t radio_get_rng_seed(); +void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr); +void radio_set_tx_power(uint8_t dbm); +mesh::LocalIdentity radio_new_identity(); \ No newline at end of file