- Main chip: Quectel EC800N-CN (LA)
- System: MicroPython v.1.13.0 (mPY: 10245, Python v3.4.0, QPY v0006)
- mPY RAM: 512256 bytes
- mPY ROM: ~576KB in /usr/ plus ~100KB in /bak
- Official module page Chinese
- Official docs/firmware/software Chinese
- QuecPython API documentation English / Chinese
- QuecPython on GitHub
- QPYcom v3.6.0 (Windows)
- USB Drivers (Windows)
- Based on Bootstrap 5 and HTMX JS
| GPIO | Pin | Function 1 | Function 2 | Notes |
|---|---|---|---|---|
| GPIO1 | 30 | PCM_CLK | SPI0_CLK | Side port #3 |
| GPIO2 | 31 | PCM_SYNC | SPI0_CS | Side port #4 |
| GPIO3 | 32 | PCM_DIN | SPI0_MOSI | Side port #5 |
| GPIO4 | 33 | PCM_DOUT | SPI0_MISO | Side port #6 |
| GPIO5 | 49 | LCD_RST | PWM3 | |
| GPIO6 | 50 | LCD_SPI_DOUT | SPI1_MOSI | |
| GPIO7 | 51 | LCD_SPI_RS | SPI1_MISO | |
| GPIO8 | 52 | LCD_SPI_CS | SPI1_CS | |
| GPIO9 | 53 | LCD_SPI_CLK | SPI1_CLK | |
| GPIO10 | 54 | CAM_MCLK | GPS Power pin | |
| GPIO11 | 55 | CAM_SPI_DATA0 | ||
| GPIO12 | 56 | CAM_SPI_DATA1 | ||
| GPIO13 | 57 | CAM_I2C_SCL | ||
| GPIO14 | 58 | CAM_I2C_SDA | ||
| GPIO15 | 80 | CAM_SPI_CLK | Red led | |
| GPIO16 | 81 | CAM_PWDN | Blue led | |
| GPIO17 | 76 | KP_MKOUT_2 | Yellow led | |
| GPIO18 | 77 | KP_MKIN_2 | IN2 | |
| GPIO19 | 82 | USB_BOOT/KP_MKOUT_4 | OUT4 | |
| GPIO20 | 83 | KP_MKIN_4 | IN4 | |
| GPIO21 | 86 | KP_MKOUT_1 | OUT1 | |
| GPIO22 | 87 | KP_MKIN_1 | IN1 | |
| GPIO23 | 66 | I2C0_SDA | Device @ 0x62 | |
| GPIO24 | 67 | I2C0_SCL | Device @ 0xE2 | |
| GPIO25 | 17 | UART2_RXD | GPS Tx | |
| GPIO26 | 18 | UART2_TXD | GPS Rx | |
| GPIO27 | 19 | UART2_DTR | ||
| GPIO28 | 20 | UART2_RI | ||
| GPIO29 | 21 | UART2_DCD | ||
| GPIO30 | 22 | UART2_CTS | ||
| GPIO31 | 23 | UART2_RTS | ||
| GPIO32 | 28 | UART1_RXD | IN0 | AUX UART |
| GPIO33 | 29 | UART1_TXD | OUT0 | |
| GPIO34 | 38 | UART0_RXD | DEBUG UART | |
| GPIO35 | 39 | UART0_TXD | ||
| GPIO36 | 16 | NET_STATUS | PWM2 | |
| GPIO37 | 78 | LCD_TE | PWM1 | |
| 79 | PWM0 |
